Project parameters Vehicle size parameters Length × width × height (A×L×C) 8230×3024×3450mm Wheel base (B) 3300 Minimum ground clearance (D) 420 mm Maximum unloading height (E) 3110 mm Corresponding unloading distance (G) 1100mm Unloading Angle (J) -45° Wheel base (N) 2190 mm Steering Angle (O) 38 degrees Horizontal pass radius (outside bucket) (P) 6850 mm Minimum turning radius (outside rear wheel) (Q) 5890mm Machine performance parameters Bucket volume 3.0 m after Rated load 5000kg Operating weight: 17200-17600kg Maximum traction 165 kN Maximum starting force ≥200 kN Tilting load ≥110 kN The engine Model WP10G220E341 Type line, water - cooled, high - voltage common rail, four - valve Engine power: 162kW The rated engine speed is 2200 r/min Volume 9726 ml Maximum torque 950 N.m Emission standard gb20891-2014 (state iii) Minimum fuel consumption rate ≤215g/kw.h The transmission system Torque converter type single stage three components single turbine hydraulic converter Gearbox type fixed shaft electro-hydraulic shift Gear four after four Forward Ⅰ gear speed 0 ~ 6.7 km/h Forward Ⅱ gear speed 0 ~ 12.4 km/h Forward Ⅲ gear speed 0 ~ 25.9 km/h Forward Ⅳ gear speed 0 ~ 38 km/h Back Ⅰ gears of 0 ~ 6.8 km/h Back Ⅱ gears of 0 ~ 12.5 km/h Back Ⅲ gears of 0 ~ 26.1 km/h Back Ⅳ gears of 0 ~ 38.2 km/h Work unit hydraulic system Type hydraulic pilot control