Among the many parts of the excavator, the bucket plays a vital role. It is in direct contact with various materials and is subject to tremendous pressure and wear. Therefore, it is very important to maintain the excavator bucket to extend the service life of the excavator and improve the working efficiency. Today, the editor brings you tips for the maintenance of the excavator bucket.
First of all, pay attention to the daily cleaning of the bucket. After each operation, the soil, sand and other debris on the bucket should be cleaned in time. If these debris accumulate on the bucket for a long time, it will not only increase the weight of the bucket and affect the working efficiency of the excavator, but also cause corrosion and wear to the bucket. You can use a high-pressure water gun to rinse to ensure that the surface of the bucket is clean and tidy.
Secondly, check the wear of the bucket. Regularly conduct a comprehensive inspection of the bucket to observe whether the bucket teeth, side plates, bottom plates and other parts of the bucket are worn, cracked or deformed. If the bucket teeth are found to be severely worn, they should be replaced in time. The bucket teeth are the key parts of the bucket. Worn bucket teeth will reduce excavation efficiency and increase fuel consumption. At the same time, for cracked or deformed parts, they should be repaired or replaced in time to prevent the problem from further expanding.
In addition, use the bucket correctly. During excavation operations, avoid excessive excavation and forced excavation. Excessive excavation will cause the bucket to bear excessive pressure, which may easily cause the bucket to deform or damage. Forced excavation will accelerate the wear of the bucket and shorten its service life. The operator should reasonably adjust the excavation force and angle according to the actual situation to ensure that the bucket works within a safe range.
In addition, do a good job of lubricating the bucket. Regularly lubricate the connecting parts of the bucket, such as pins, ear plates, etc. Good lubrication can reduce friction, reduce wear and extend the service life of the bucket. Special lubricants can be used to lubricate according to the prescribed time and method.
Finally, pay attention to the environment when storing the bucket. If the excavator is not used for a long time, the bucket should be properly stored. Choose a dry and ventilated place to avoid the bucket from direct sunlight, rain and humid environment. Anti-rust paint can be applied on the surface of the bucket to prevent the bucket from rusting.
In short, the maintenance of the excavator bucket cannot be ignored. Through correct measures, the service life of the bucket can be effectively extended, the operating efficiency of the excavator can be improved, and strong guarantees can be provided for engineering construction. After our second-hand excavator is acquired, a professional master will repair and inspect the bucket, and regularly maintain it. It is also very particular when it is stored, so our attitude towards the product is the key to our customers' trust in us.