New XCMG XE270GK Crawler Excavator

Product Introduction

1. XCMG Customized Euro IV Engine: High-quality, high-power engine with fast response and sufficient power reserve. In the commonly used range of 900-1700 rpm, compared with Euro III, the torque can be maximally increased by 15%. 

 

2. Exclusive Post-Treatment Control Technology of XCMG: Ultra-long cleaning mileage, up to 5000 hours; intelligent non-sensory regeneration technology, with a regeneration cycle of 105 hours. 

 

3. Fully Electronic Controlled Hydraulic System: By adjusting the power distribution of the main pump and the opening time and current size of the main valve of the full electronic control valve, the coordination of control can be achieved, the throttle valve is cancelled, and the pressure loss is reduced; through optimizing the control strategy, the regeneration of the bucket and the rapid return of oil can be realized, improving the digging efficiency and control performance of the entire machine. One-click forward and reverse hand switching; 

 

4. Reinforced下车架 and Track Travel System： The thickness of the X frame is increased by 14%， all key weld seams are chamfered， the fatigue life of the welds is increased by more than 1.5 times， the diameter of the guide wheel shaft is increased by 8%， the diameter of the wheel body tread is increased by 8%， the strength of the guide wheel is increased by more than 17%， and it is not afraid of harsh working conditions in mines； 

 

5. New Large-View Positive Pressure Cab： Equipped with a 10.1-inch touch screen instrument， five-sided surround sunshade curtains， one-click start switch， large-sized suspended seats， large-power fully automatic air conditioning， extended handles， special foot pedals， etc.； 

 

6. Excellent performance for heavy-load excavation and loading operations： The cylinder bore is thickened， the digging force of the larger bucket/dump stick is greater， and the chassis size is larger.